All customers should be aware of wet tiles or pavers regardless of application for outdoors or indoors and seek advice from the relevant consultants as to level of slip-resistence of any particuler tile or paver and its suitablility for the intended application, as no liability can be accepted for personal injury or accidents arising from slipping or falling, under any circumstances.

On request Eco stone Australia Pty Ltd may provide Slip rating classification for required tile or paver ( if available) or provide samples to conduct own Slipery Test by autorized institution. Please note that we provide the Slip Rating classifications as a guide, based on a slip test report - as we have no information as to the ultimate environment in which these tiles or pavers will be laid. We are not responsible for the suitability of these tiles for the environment in which they are laid.

These tiles or pavers may achieve an acceptable rating in a laboratory test, however it is quite possible that the performance in-situ will be less than expected due to unforeseen circumstances, such as grouting, wear and tear, build up of residue, type of sealer, type of shoes. Variables such as floor levels, water, oil and other contaminants affecting tiles or pavers are beyond the control of the supplier.

These results are therefore to be seen as a guide to estimate the merits of one tile verses the other. Please refer to the Australian Standards, which indicates locations that correspond to the relevant Pendulum and/or Ramp ratings.

We note that if these results have a value that may appear acceptable, the results must not be interpreted that Eco stone Australia Pty Ltd will provide any liability against damages for slipping on tiles or pavers.